For visually impaired users: Browse the streamlined version of our website.

ProTek RC Servo Lead & Terminal Crimping Tool

Low Price: $19.99
Add To Cart Add to Wish List
In Stock Online!
$1.99 Flat Rate Shipping!
This item is eligible for $1.99 flat rate shipping Learn More
This item earns up to 20 VIP Reward Points Learn More

The ProTek RC Servo Lead & Terminal Crimping Tool is the tool you need to make custom length signal wires for your ESCs, receiver batteries and servos. This tool safely secures the connector pins on wire sizes between 14 and 28awg, without damaging the pin or the wire. Simply strip a short length of the shielding off the wires, install the connector pin into the tool, insert the wire into the pin, and squeeze the tool to crimp the pin in place.

Want more? Unlike most terminal crimping tools, the ProTek tool will allow you to strip 12, 16 and 22awg wire, and includes a cutter as well. Crimps 20, 24 and 28 AWG wire.

 

NOTE: When changing the length of your signal wires or receiver battery connectors, for the best results we recommend you use new connectors.

This product was added to our catalog on August 26, 2016

Verified Owner
Monday, Oct 17 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I dont know why everyone is so down on this crimp tool? It took some experimenting and a little trial/error to figure it out, but after a couple of tries, I learned how to use the crimper properly. The tip has a step in it that is there for a reason...guys who are grinding it down so the tip is all the same level are ruining the tool. The larger gap opening is to secure the wrap around the shielded part of the wire, the smaller gap opening squeezes the two tabs down that hold the unshielded wire and hold the wire to the pin, making the electrical connection. On some pins, this can be done in one squeeze, others require re-positioning and a little squeeze to shape the back of the pin where it wraps the shielding so it fits into the plug. Once I do that, I give it a soft squeeze with the cutter to put an extra little crimp in the tabs. I have shortened up servo and switch leads, made custom length extensions and wired plugs onto my rock crawler light bars. Never had a problem with any wires coming loose, and in this application works better than solder. Spend a little time with it and learn how to use the tool and it works as good as any other crimper out there. If anything its better, because it does so many different parts of the job (cutting, stripping, crimping).
Saturday, Apr 29 2017 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I have this same tool under a different brand and people here are right it is not designed for crimping servo contacts (officially they are called Mini-PV terminals). I recommend prowling ebay for a Berg/DuPont HT-95 or HT-208A crimping tool, this is the official factory tool for these connectors and you can get used units off ebay for less than $100 usually. Just be sure it's actually the correct tool some have been modified or have missing parts (look up pictures and compare)
Verified Owner
Thursday, Jun 6 2019 (3 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
This is ridiculous. This tool does not even have proteks branding on it. I did a little research about pens and crimping tools and found that this cripping tool is not even for this style of connector. Complete and utter waste of time. Please pro Tek remove this from your catalog and replace it with something designed for these plugs. Even if that means charging $50 for the right tool. Trying to build my b74 and I'm pulling my hair out.
Verified Owner
Wednesday, May 29 2019 (4 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Poor quality from a usually high quality brand. It does the job but I expected better from Protek. Donít waste your money.
Thursday, Apr 25 2019 (5 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Junk! Tried very patiently to use this tool, never worked worth a darn, better off just using needle nose pliers, and if you can solder the wire to the terminal much better connection and very repeatable unlike this garbage tool!
Verified Owner
Tuesday, Mar 19 2019 (6 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I have to confirm the negative reviews on this tool.

Incredible piece of crap.

After ten attempts, I can get better results using my multitool to just smash-crimp so I'm not wasting any more connectors trying.

Not only does it not crimp properly, not enough to even hold a wire, but nothing about it is appealing. Workmanship is crap..rivets are crap..paint is crap..the stripper holes aren't round so they're as useless as the crimp. There's even a little rust thrown in.

Should be pulled from stock and no longer sold.

I can't imagine one NOT being returned and I have NO idea how it it's achieved three stars.
Verified Owner
Sunday, Jul 15 2018 (about a year ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I give it 5 stars for the price, functionality and durability. I just practiced using it with some spare servo connectors and heavy duty servo wire. It crimped the connectors to the wires very well. I ohmed it out with my meter, no resistance measured. I did three sets, it worked very well each time. For the amount that I will use it, I am very happy with the results. I certainly did not want to pay $100+ for something I would barely use. I did it exactly as explained in the video. I then placed a couple of drops of the Heli Dry Fluid Extreme into the crimping notch and let it dry. That made it feel a little smoother when crimping but the outcome was just the same. Well crimped wire, and no resistance in connection.
Verified Owner
Sunday, May 20 2018 (about a year ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I see nothing wrong with this tool. It works fine for the job once you learn how to use it. Well built.
Verified Owner
Sunday, Dec 17 2017 (about a year ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Terrible waste of money. Will not crimp or strip. Lesson learned.
Verified Owner
Sunday, Apr 30 2017 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Not really sure why there are so many negatives on this. I used it to shorten wires on 3 cars to clean up wiring for servos, esc's, transponders, and capacitors. It worked absolutely perfectly, crimps are nice and tight, and it's fairly easy to use. Definitely worth the 20 bucks.
Verified Owner
Tuesday, Oct 11 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Have to agree this is horrible. Protek i suggest pulling this from your product line and finding another crimper. I got mine to work okay however I had to take to it with a grinder.

Did you guys even test this thing before you packaged it up and sold it.

This tool is in no ways reflection of all your other RC products which are high quality.
Verified Owner
Saturday, Oct 8 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
worst crimping tool wouldn't buy.............................
Verified Owner
Sunday, Oct 2 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Either this is the worst crimping tool I have ever used or it is simply not designed for small-scale work such as servo leads. Would not recommend.
Friday, Jun 7 2019 (3 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Do not waste a dime on this piece of junk tool, they do not even slightly work. Good ones are way better made but also way more money; which I would gladly pay if I knew the tool worked properly!
Verified Owner
Wednesday, Mar 20 2019 (6 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Like I have seen in a few other reviews, this will not crimp enough to hold the wire. I am having to manually crimp connections after using the crimper to get them small enough to bite and hold. I can see it is the cutter on handle part preventing the crimp area from closing small enough. Have thought about filing this cutting area down a bit to allow crimp area to go smaller. Seen in another review this was done as well. Ehhhh for the price and a bit of a mod it works.
Verified Owner
Sunday, Feb 3 2019 (7 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Does not work properly. Recommend using different tool.
Verified Owner
Saturday, Jan 26 2019 (8 months ago)
ProTek RC Servo Lead & Terminal Crimping Tool
I bought this because I hate having too much wire in my cars to get in the way. I must say the best part of this tool is the stripping part.
The cutter part isnít sharp enough... basically crushes better than cuts
As for the crimping part. I thought it did a great job until I tried my buddies real crimper. I noticed as hard as I tried to take my time and align everything it wouldnít come out looking like the factory crimps. It produced a more flattened crushed look than Curled over gripping look. Well one of my connections wasnít great and a buddy helped me at the track who had a real crimper ďall be it it doesnt have a cutter or stripper built inĒ it easily squeezed the most perfect factory crimp. Iím going to keep it in my pit hauler for desperate measures along with my crappy traveling soldering iron but you best believe Iím going out and getting that tool my buddy had.
Verified Owner
Thursday, Mar 8 2018 (about a year ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Works ok . I needed to grind down at cutter flat spot/ stop to let you crimp down more wasn't much this let the tool close a little more and work better with thinner servo wires as some are thinner than others.
Not the best but ok for the cost with a little work can make it a so so crimper that will do a good crimp. The down fall Is it hard to hold untill you learn what to do and mite need grinding to make it crimp as tight as needed..
Verified Owner
Thursday, Dec 1 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
This does not work for Servo Leads at all. This will only do terminal crimps. Do not buy if you are wanting to replace your servo leads it will not work.
Verified Owner
Saturday, Oct 15 2016 (about 2 years ago)
ProTek RC Servo Lead & Terminal Crimping Tool
Just wasted 20 bucks, every Protech product I have bought has been top notch but this thing is junk. I probably could make it work but would have to use a grinder.