This is the optional aluminum replacement single arm servo horn from Losi. This is the servo horn that is used for the steering bell crank. This servo horn will work on Futaba and Ace servos.
This product was added to our catalog on May 16, 2007
Saturday, May 30 2015 (about 4 years ago)
Losi Aluminum Servo Arm (FUT)
I bought this intended for the SCTE 2.0. The finish and looks are superb, and the spline fit and threading is just as good.
With that being said, it was pretty tight on the metal servo splines the first time I tightened it down and required some tactile prying to get it back off, but the second time around it was much easier and still fit slop-less. The inside mounting hole for the 2.0 can cause servo rub/bind if your not careful at setting the link length and EPA, but the outer hole seemed to have plenty of clearance. Very nice product and wouldn't hesitate to buy more.