Raptor 30 Upgrades from HeliProz

Raptor 30 Upgrades from HeliProz

Our newest HOT upgrade - CNC machined head button for the Raptor 30! Anodized purple, HeliProz Exclusive!

The DBC Header Tank is designed for a perfect fit on the Raptor as shown - the best and easiest to install. And the DBC Rear Servo Mount looks great and eliminates a lot of slop and binding on the tail. For the cheapest, simplest and best way to get a driven tail during autos, install the DBC Slipper Clutch - which also solves the wah-wahs!

DL Purple Anodized CNC Tail Yoke - Great Option!

CNC Tail grips for Raptor 30/50 with bearings installed, complete set as shown from QW.

At left is the new CNC Aluminum Raptor 30 Washout set from QWW. This is a very well designed and manufactured set, uses same arm geometry as the stock plastic unit. Base is machined from 7075 aluminum stock, arms are supported by two bearings each.

You use your stock washout links and pins. Set-screw in end of arm holds pin firmly in place.

A very good part and at under $50 an excellent value!

The DBC Boom Located T/R Servo Mount is a great upgrade. Puts servo for tail on the boom so you can run a carbon pushrod for direct, friction free connection. includes ALL hardware.

Front Idler Pulleys from QWW add pizazz and work great - $22.99 pair.

At left is the DBC CNC horizontal fin mount and rear boom support mount. Includes all hardware as shown.

MrC Carbon Boom Supports offer best design and value - angled tangs fit better, price is lowest, and available in Gold, Blue, Purple and Silver anodized fittings.

(Also check out the MrC Carbon 3D fins, nicer than ThunderTigers and WAY less money!)

Ace PV0092 Metal Upgrade Swashplate, Raptor

We have to admit to being surprised by the quality of this swashplate. They even broke corporate ranks and used a JAPANESE bearing in it. This is a silky smooth swashplate, far better than almost any of the "upgrade" swashplates we have in the other lines - it's a peer to the much higher priced Kalt upgrade swashplate. These just arrived in the US so obviously nobody here has a lot of time on them, but they are extremely smooth and slop free right out of the box. Anyone past the nervous novice stage will want this upgrade. Approx. $60 well spent.

Ace PV0102 Upgrade Muffler, Raptor

What can you say about a boring old muffler? Not much, except that this is a GREAT muffler and should be considered strongly as a "must have" for your Raptor unless you prefer a tuned pipe. Fairly large, the Ace Upgrade muffler runs great, has excellent power and is smooth and quiet. Includes bolts, gasket and pressure tap. Under $50 and in stock now.

Aftermarket Fiberglass Canopy, Raptor

Above and at left are some very nicely made aftermarket canopies for those who aren't in love with the stock Raptor canopy shape. Unpainted, both are excellent quality seamless layups and are reasonably priced. Ready for final prep and painting. Lower one has carbon fiber reinforcement molded in for a somewhat more rigid canopy.

At the right are some of the other Ace Upgrades that are presently available. The Carbon Boom is self explanatory, a replacement (same length) tail boom in nice carbon weave finish. The Carbon/Aluminum boom supports are nice, they have straight ends but ANYTHING is better than the stock supports and they're priced about right. The Carbon Fin sets are ridiculously high priced and come with decals (?) for one side (??) of each fin. The horizontal fin includes "pucks" so you don't have to buy a better fin mount. Finally, the aluminum frame posts are way cool - complete set of metal spacers, threaded and including button head bolts to replace the sheet metal screws and plastic spacers.