ThunderTiger Raptor 90

OUR RAPTOR STD 90 (Eric's): Awesome performance with OS91 C-Spec with pump and Hatori TBS Muffler. Mavrikk PRO series 700 G4 Carbon blades, Mavrikk 102mm Tail Blades, and V-Paddles, DBC Head Button, DBC rear servo mount and CH Carbon pushrod. NICE FLYING MACHINE. This configuration is the BEST VALUE for a low cost, highly agile 90 size 3D machine! SERIOUS UPGRADE we strongly recommend and use for 3D flying is the Top Dragon (TDR) Metal Head set. (See online catalog)

The Raptor 90 is a good flying heli. (with the Top dragon head it is a GREAT flying heli!) The Frames are GREAT, a mix of metal and high quality molded parts with low cost and very high strength. Kits do NOT have mufflers or blades.

The machine has a simple torque tube drive for the tail and uses a split gear constant drive. The molded plastic canopy is rugged and has attractive blue decals. OPTIONAL GEARS and PINIONS are available. YOU CAN NOT install a YS engine in the stock kit unless you run an 8x1mm tap thru the flywheel, as the fan hub is threaded to fit the OS or ThunderTiger engines only. Sorry! You can use the Ace metal fan (optional) for YS 60 or 90 without mods.

This heli has a split gear constant drive and torque tube driven tail. The front and rear drive gears for the torque tube are low cost, durable and precise molded units. Wipe out the entire boom, tail gear system and drive shaft and you'll spend about 20 minutes and $60 to have it fixed. THAT's a FRACTION of what the Fury or Vigor will cost for a tail boom/drive system rebuild! The rest of the heli is similar - LOW maintenance, EASY to work on, and LOW parts cost.

COMPLETE RAPTOR 90 PARTS IN STOCK AT GREAT PRICES!

The Boss's RAPTOR 90 SE with Top Dragon Head & Tail installed, JR8311s, OS .91 C-Spec with Pump, Hatori Muffler, 601 gyro

This is the NEWEST, Special Edition (Raptor 90 SE) kit, Ace Part #4891-K10, 90 kit gear/mount for OS or TT 91, (8.45:1 ratio) dual tail shaft bearings, new fan shroud, metal swashplate, Free UPS in 48 states from HeliProz! 11Tooth Clutch Bell Pinion, New Clutch System (larger clutch, larger clutch bell, and new liner). No Main Blades in kit. THIS SE VERSION includes the following upgrades from the Std version: Metal Rotor Hub,Metal Grips (12mm grip with 5mm bolt hole) Metal Side Frame Stiffener, Metal Elevator Lever Set, Metal Cooling Fan, Metal Flybar Control Arms, Metal TR Pitch Slider, Carbon Fiber Side Frames, Carbon Tail Fins, Carbon Base plate, Carbon Tail Boom, Carbon Boom Supports, Carbon TR Drive Shaft. (NOTE - Photo is Boss's Raptor, with several upgrades such as the TDR Head, Flybar Control Arm Set upgrade , Mavrikk blades, engine etc etc etc which are NOT included in the Raptor 90 SE Kit!
------------------------------------------------------------------------

 

Note that ALL Raptor Kits, Combos, Parts and Upgrades are priced as posted on our online catalog.

FREE UPS GROUND SHIPPING on all orders over $100 in the 48 states.

ALL RAPTORS MAIN PAGE

 
 

HeliNews
HeliProz ONLINE catalog
Products & Reviews
Beginners Advice
Flying R/C Helis
NEW PRODUCTS
About Our Online Catalog
 E-MAIL: sales@heliproz.com