The Blade 120 SR is a fixed-pitch heli that will give you the confidence to master the basics of single-rotor flight. Its unique rotor head was specifically designed to provide the inherent stability of a coaxial helicopter, but provide the agile control of a single rotor helicopter. Modeled after the popular ultra micro-sized Blade mSR, the sub-micro-sized 120 SR is larger, faster, and more powerful -- which makes outdoor flight a reality.
It comes out of the box 100% factory built and equipped with a factory installed 5-in-1 control unit with Spektrum's 2.4GHz DSM2-compatible receiver, main motor ESCs, mixer, gyro, and fully proportional servos. A ready-to-fly version with 2.4GHz DSM2™ transmitter and a Bind-N-Fly® version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both include a 1S 500mAh Li-Po battery and a single-cell, variable rate Li-Po charger as well as an AC power supply.
Larger Sub-Micro Size
The Blade 120 SR is small enough to fly in just about any indoor environment from the office to the family room. But because it's slightly larger than most ultra-micro helis, it has enough mass to handle flying outside in a light breeze. It's also easier to see when you're flying in larger outdoor environments.
Factory Installed 5-in-1 Control Unit
The Blade 120 SR's 5-in-1 control unit combines a 2.4GHz DSM2 receiver, motor speed controls, servos, mixer and gyro onto one circuit board. This eliminates the weight, cost and complexity of mounting each of these components individually.
Adjustable Swash Sensitivity
The Blade 120 SR comes out of the box set up with softer control response for pilots transitioning from coaxial helis. After you get the hang of flying with the default setup, you can switch the cyclic control links to the second set of ball links on the inner swash and enjoy more aggressive response.
Specialized Bell-Hiller Head Design
The 120 SR's specialized Bell-Hiller head design lets you enjoy the extra speed and agility of a single-rotor heli without giving up a lot of the self stabilizing characteristics you might be used to if you're transitioning from a coaxial heli.
Carbon Fiber Main Shaft and Tail Boom
The 120 SR's main shaft and tail boom are made from incredibly tough, yet lightweight, carbon fiber material. This gives the heli plenty of durability without adding a lot of weight.
With the Ready-to-Fly version of the Blade 120 SR, you get a completely assemble and flight-tested heli plus everything you need to get flying, all in one box. Ready-to-Fly Blade 120 SR includes: MLP4DSM transmitter with 4-AA batteries, 1-cell 3.7V 500mAH Li-Po battery, and variable rate 1-cell DC Li-Po charger with AC to 6VDC 1.5-amp power supply .
• Sub-Micro size
• 100% factory-assembled, test-flown and ready-to-fly right from the box
• Unique rotor head designed specifically to provide inherent stability of a coaxial helicopter, but provide the agile control of a single rotor helicopter
• Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2-compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos
• Type: Sub-Micro Fixed-Pitch Single-Rotor Helicopter
• Main Rotor Diameter: 12.5 in (318mm)
• Gross Weight: 3.75 oz (106 g)
• Length: 12.5 in (318mm)
• Kit/ARF/RTF: RTF