AQUB1810 Wildcat EP BL Catamaran 2.4Ghz

Detailed Description

The new wave knockout.

This isn’t your typical catamaran. For proof, just let the Wildcat EP loose and watch it fly! You’ll find the 1800kV outrunner brushless motor delivers speed and efficiency. There’s also a water-cooled LiPo-compatible 50A brushless controller with low-voltage cutoff, a stutter bump and Deans® Ultra Plug® connector. A Tactic™ 2.4GHz radio system provides first-class control, and a "break-away" rudder system swings back upon impact to prevent damage to the hull.

Features:
• Hull: Molded ABS plastic with transom drain plug and preapplied graphics
• Motor: 1800kV brushless outrunner
• Motor Mount: Water cooled aluminum with transom mounted water pickup
• Drive System: Surface drive propeller system with 1/8" (3.2mm) shaft
• Radio: Tactic 2.4GHz TTX240 2-channel with fail safe, steering and throttle trim and servo reversing and steering rate adjustment
• Electronic Speed Control: 50A water coooled, LiPO compatible, low voltage compatible and Deans Ultra connector
• Propeller: Two blade 42mm diameter FRP (fiber reinforced plastic)
• Rudders: Two aluminum construction with breakaway shear bolt design

Specifications:
• Length: 26.5" (673mm)
• Overall: 29" (737mm)
• Beam: 9" (229mm)
• Height: 5.5" (140mm)
• Weight: 32oz. (907grams) RTR w/o batteries
• Motor;
• KV Rating: 1800kv
• Operating Current: 3.8A, 8V/DC (without loading, 8V/DC)
• Input: 3-S LiPo battery
• Max Current: 55A/15S
• Shaft Diameter: 4mm
• Motor Resistance: 37 miliohms
• Dimension: 1.4x1.42" (35mmx36mm)
• Weight: 3.77oz (107g) ±.35oz (10g)
• Plugs: 4mm
• ESC;
• Amps: 50 amp continuous
• Max Amps: 65A 10 sec
• Voltage Range: 9V-12.6V
• BEC: 5V 2A
• Motor Connectors: 4mm bullet (3)
• Battery Connector: Deans®
• Stutter Voltage: 9.7 volts
• LVC: 9 volts
• Wire Gauge: #14
• Max Output Power: 500 watts
• On-Resistance: 0.0015 ohms
• Operating Frequency: 8KHZ PWM, 16MHZ MCU
• Timing Angle: Auto

Includes:
• RTR Wildcat Catamaran
• Motor
• Radio
• Steering Servo
• ESC
• Stand
• Instruction Manual

Requires:
• AA Batteries: Four for transmitter
• LiPo Battery: 3S 11.1V at least 2000mAh
• Battery Charger: Compatible with selected battery
• LiPo Charging Sack and Shore Equipment


An 1800kV outrunner brushless motor comes factory-installed, for high-speed performance.	The water-cooled 50A ESC is waterproof and designed for use with a single 3S (11.1V) LiPo Battery. Other features include a stutter bump, low-voltage cutoff and a Deans® Ultra Plug® connector.

Apply the included radio box tape to seal the hatch and keep electronics dry.	Includes a unique "break-away" rudder system, which swings back upon impact to prevent hull damage. AQUB7901 Replacement Nylon Break-Away Bolts (available separately)

Fly Hard! HeliProz has the Parts!

Call Toll Free: 1.877.435.4776

AQUB1810 Wildcat EP BL Catamaran 2.4Ghz

Amazing Blade Sale!

Where Do I Begin?

Just Added

Loot

Helicopters/Multi-rotors

GoPro Cameras

Heli Parts

Rotor Blades

Fuselage & Parts

Canopies & Accessories

Heli Upgrades

Night Flying

Electronics/Accessories

Nitro Engines/Accessories

Flight Support

Radio Equipment

Flybarless

FPV/Telemetry

Apparel

Airplanes/Accessories

RTR Cars/Trucks/Buggies

RC Watercraft

Heli Life

Media

Manuals

Tips, Tricks, Articles

Garage Sale

Getting Started

Calendar of Events

HeliProz Ads & Downloads

HeliProz Having Fun!

Signup for Heli News!

Name:

Email


Signup