Yes you will feel a more positive fore-aft cyclic response!

This inexpensive upgrade adds power and precision to the elevator control function on your Raptor 30 or 50.

Complete package as shown at left: pushrods, ball links, link balls, CNC Arm with bearings installed, servo mounting plates and all of the hardware.

Two of the servo plates are used as normal, on top of the servo mounting ears. The others are placed UNDER (behind) the servo mounting ears and grommets to space the servo a little farther from the frame.

Both pushrods from the Push Pull arm to the servo arm are made up to the SAME length, and the link balls are of course set equal distances from center on BOTH the servo arm and the push pull arm.

As with ALL installations, USE THREADLOCK on all metal-to-metal connections, and of course use care not to overtighten the push-pull arm center pivot bolt.

Assembeled unit is shown below on the boss's Raptor 50.